Case CX100 Engine Specs
Engine Model – Perkins 1004.40T
Engine Type – 4 stroke, direct injection, turbocharged diesel
Number of Cylinders – 4
Displacement, cu in (L) – 244 (4,0)
Engine Bore, in (mm) – 3,93 (100,0)
Engine Stroke, in (mm) – 5,00 (127,0)
Aspiration – Turbocharged
Maximum Engine Power, hp (kW) – 100,1 (74,6)
Rated Engine Power, hp (kW) – 94,0 (70,1)
Rated Engine Speed, rpm – 2200
Maximum Torque, Nm (ft-lbs) – 405,0 (299,7)
Torque Speed, rpm – 1400
Compression – 17.25:1
Fuel System – Direct injection
Fuel Tank Capacity, gal (L) – 41,3 (155,0)
Oil Capacity, qts (L) – 9,3 (8,8)
Coolant Capacity, qts (L) – 16,9 (16,0)
Electrical System Rating, Volts – 12
Charging System – Alternator
Alternator Rating, Amps – 65
Case CX-100 Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 83,0 (61,9)
PTO Speeds, rpm – 540/1000
PTO Clutch – Hydraulic wet disc
Transmission Configuration
Transmission Type (Std) – 16F/8R, Semi Powershift
Number of Forward Speeds – 16
Number of Reverse Speeds – 8
Clutch – Four gears in 2 ranges (low/high)
Transmission Type (Opt) – 8F/8R, Synchro shuttle
Number of Forward Speeds – 8
Number of Reverse Speeds – 8
Clutch – Dry disc
Clutch Disc Diameter, in (mm) – 12 (300)
Maximum Forward Speed, mph (kph) – 24,4 (39,2)
Maximum Reverse Speed, mph (kph) – 22,1 (35,5)
Transmission Oil Capacity (2WD/4WD), qts (L) – 36,4 (34,3) / 39,1 (37,0)
Service Brake – Differential hydraulic wet disc
Case IH CX100 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size (2WD) – 7.50-16
Rear Tire Size (2WD) – 16.9-34
Front Tire Size (4WD) – 13.6R24
Rear Tire Size (4WD) – 18.4R34
Case IH CX-100 Hydraulics and Hitch
Hydraulic System Type – Open center
Implement Pump Flow, gpm (Lpm) – 15,7 (59,4)
Steering Pump Flow, gpm (Lpm) – 8,5 (32,2)
Total Flow, gpm (Lpm) – 24,2 (91,7)
Hydraulic Pressure, Bar (psi) – 173 (2500)
Hydraulic Capacity (2WD), qts (L) – 9,1 (34,4)
Hydraulic Capacity (4WD), qts (L) – 9,8 (37,1)
Number of Standard Remote Valves – 0/3
3-Point Hitch Category – 2/1
Draft Sensing or Lift Control – Electronic upper link
Standard Lift Capacity at lift pin, lb (kg) – 3665 (1660)
Optional Lift Capacity at lift pin, lb (kg) – 5100 (2310)
Case CX-100 Dimensions and Weight
Wheelbase (2WD), in (mm) – 92,3 (2340)
Wheelbase (4WD), in (mm) – 93,7 (2370)
Length, in (mm) – 147 (3730)
Height, in (mm) – 107 (2720)
Turning Radius, in (mm) – 176 (4480)
Weight (2WD), lb (kg) – 7400 (3350)
Weight (4WD), lb (kg) – 8470 (3840)
Weight (Maximum), lb (kg) – 10150 (4600)