Case CVX160 Engine Specifications
Engine Model – Sisu 620.62
Engine Type – Six-cylinder turbo diesel
Number of Cylinders – 6
Displacement, cu in (L) – 402,5 (6,60)
Engine Bore, in (mm) – 4,25 (108,0)
Engine Stroke, in (mm) – 4,72 (120,0)
Aspiration – Turbocharged
Intercooled – Air cooled
Maximum Engine Power, hp (kW) – 181,0 (135,0)
Rated Engine Power, hp (kW) – 158,5 (118,0)
Rated Engine Speed, rpm – 1900
Maximum Torque, Nm (ft-lbs) – 675 (499,5)
Torque Speed, rpm – 1400
Torque Rise – 39%
Engine cooled – Water cooled
Fuel System – High-pressure common rail injection
Fuel Tank Capacity, gal (L) – 82,0 (310,0)
Oil Capacity, qts (L) – 21,2 (20,0)
Electrical System Rating, Volts – 12
Case CVX-160 Power Take-Off
PTO Operational Type – Electro-hydraulic
PTO Horsepower, hp (kW) – 140,3 (103,5)
PTO Shaft – Exchangeable, 6/21 spline
Rear PTO Speeds, rpm – 540/540E/1000E
Rear PTO / Engine Speeds, rpm – 540/1880, 540E/1608, 1000E/1600
Front PTO – Optional
Front PTO Speed, rpm – 1000
Front PTO / Engine Speed, rpm – 1000/1880
Case IH CVX160 Transmission
Transmission Type – CVT, Continuously variable transmission
Gears – Infinite forward and reverse
Maximum Forward Speed (Std), mph (kph) – 24,9 (40,0)
Maximum Forward Speed (Opt), mph (kph) – 31,2 (50,0)
Transmission Oil Capacity, gal (L) – 15,8 (60,0)
Service Brake – Wet disc
Wheels and Tires
Drive Wheels – 4×4 MFWD 4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 540/65R28
Rear Tire Size – 650/65R38
Case IH CVX-160 Hydraulics and Hitch
Hydraulic System Type – PFC
Implement Pump Flow (Std), gpm (Lpm) – 27,6 (105,0)
Implement Pump Flow (Opt), gpm (Lpm) – 34,2 (130,0)
Hydraulic Pressure, Bar (psi) – 205 (2975)
Hydraulic Capacity, gal (L) – 13,7 (52,0)
Number of Standard Remote Valves – 8
3-Point Hitch Category – 3/2
Draft Sensing or Lift Control – EHC-D with hitch ride control
Standard Lift Capacity at lift pin, lb (kg) – 21790 (9900)
Standard Lift Capacity 610mm behind pin, lb (kg) – 8800 (4000)
Case CVX-160 Dimensions and Weight
Wheelbase, in (mm) – 110,7 (2810)
Length, in (mm) – 187 (4760)
Height, in (mm) – 120 (3040)
Overall Width, in (mm) – 100 (2530)
Ground Clearance, in (mm) – 20 (500)
Turning Radius, in (mm) – 213 (5400)
Steering Angle, deg – 50
Front Track, in (mm) – 75 (1897)
Rear Track, in (mm) – 74 (1870)
Weight (Operating), lb (kg) – 14300 (6500)
Weight (Maximum), lb (kg) – 25300 (11500)