Case CS-78 Engine Technical Data
Engine Model – MWM WD 401.81
Engine Type – 4 stroke, turbocharged diesel
Number of Cylinders – Four
Displacement, cu in (L) – 254 (4,16)
Engine Bore, in (mm) – 4,13 (105,0)
Engine Stroke, in (mm) – 4,72 (120,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 78,4 (58,2)
Rated Engine Speed, rpm – 2300
Maximum Torque, Nm (ft-lbs) – 298 (220,5)
Torque Speed, rpm – 1500
Engine cooled – Water cooled
Fuel Tank Capacity, gal (L) – 26,4 (100,0)
Electrical System Rating, Volts – 12
Case CS78 Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 62,5 (46,3)
PTO Speeds, rpm – 430/540/750/1000
Transmission Configuration
Transmission Type (Std) – Synchronized 16F/8R
Number of Forward Speeds – 16
Number of Reverse Speeds – 8
Maximum Speed Forward, mph (kph) – 24,8 (40,0)
Transmission Type (Opt) – 2-Speed PowerShift 32F/16R (with Creeper)
Number of Forward Speeds – 32
Number of Reverse Speeds – 16
Maximum Speed Forward, mph (kph) – 24,8 (40,0)
Service Brake – Disc
Case CS-78 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size (Std) – 9.00-16
Rear Tire Size (Std) – 16.9R34
Front Tire Size (Opt) – 13.6R24
Rear Tire Size (Opt) – 16.9R34
Case IH CS78 Hydraulics and Hitch
Hydraulic Pump Type – Open Center
Implement Pump Flow (Std), gpm (Lpm) – 13,2 (50,1)
Implement Pump Flow (Opt), gpm (Lpm) – 22,2 (84,0)
Hydraulic Pressure, Bar (psi) – 175 (2550)
3-Point Hitch Category – 2
Standard Lift Capacity at lift pin, lb (kg) – 10800 (4900)
Case CS-78 Dimensions and Weight
Wheelbase, in (mm) – 97,6 (2470)
Length, in (mm) – 165,7 (4200)
Height, in (mm) – 104,7 (2650)
Turning Radius (2WD), in (mm) – 174 (4400)
Turning Radius (4WD), in (mm) – 190 (4800)
Weight, lb (kg) – 8700 (3950)