Case CS68 Engine Specifications
Engine Model – MWM 301.89
Engine Type – 4 stroke, turbocharged diesel
Number of Cylinders – 3, In-line
Displacement, cu in (L) – 190 (3,12)
Engine Bore, in (mm) – 4,13 (105,0)
Engine Stroke, in (mm) – 4,72 (120,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 68,0 (50,7)
Rated Engine Speed, rpm – 2250
Maximum Torque, Nm (ft-lbs) – 264 (195,4)
Torque Speed, rpm – 1500
Engine cooled – Water cooled
Fuel Tank Capacity, gal (L) – 21,9 (83,0)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 65
Case CS-68 Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 57,0 (41,5)
PTO Speeds, rpm – 430/540/750/1000
Transmission Configuration
Transmission Type – 16F/8R Synchronized
Number of Forward Speeds – 16
Number of Reverse Speeds – 8
Maximum Speed Forward, mph (kph) – 24,8 (40,0)
Service Brake – Disc
Case CS68 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size (Std) – 7.50-18
Rear Tire Size (Std) – 13.6R36
Front Tire Size (Opt) – 11.2R24
Rear Tire Size (Opt) – 13.6R36
Case IH CS-68 Hydraulics and Hitch
Hydraulic System Type – Open Center
Implement Pump Flow, gpm (Lpm) – 11,5 (43,2)
Hydraulic Pressure, Bar (psi) – 175 (2550)
Number of Standard Remote Valves – 1/3
3-Point Hitch Category – 2
Standard Lift Capacity at lift pin, lb (kg) – 5760 (2610)
Case CS68 Dimensions and Weight
Wheelbase, in (mm) – 87,8 (2230)
Length, in (mm) – 149,2 (3780)
Height, in (mm) – 98,4 (2490)
Turning Radius (2WD), in (mm) – 142 (3600)
Turning Radius (4WD), in (mm) – 174 (4400)
Weight, lb (kg) – 6550 (2970)