Case CS100 Engine Specifications
Engine Model – Sisu 44DT
Engine Type – 4 stroke, four-cylinder turbocharged diesel
Number of Cylinders – 4
Displacement, cu in (L) – 268 (4,40)
Engine Bore, in (mm) – 4,25 (108,0)
Engine Stroke, in (mm) – 4,72 (120,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 96,6 (72,0)
Rated Engine Speed, rpm – 2200
Maximum Torque, Nm (ft-lbs) – 367 (271,6)
Torque Speed, rpm – 1400
Torque Rise – 39%
Fuel Tank Capacity, gal (L) – 26,5 (100,0)
Electrical System Rating, Volts – 12
Case IH CS-100 Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 77,3 (57,2)
Rear PTO Speeds, rpm – 430/540/540E
Rear PTO / Engine Speeds, rpm – 430/2130, 540/2045, 540E/1506
Front PTO – Optional
Front PTO Speed, rpm – 1000
Front PTO / Engine Speed, rpm – 1000/2130
Case CS100 Transmission
Transmission Type – 16F/8R, 2-Speed powershift
Number of Forward Speeds – 16
Number of Reverse Speeds – 8
Maximum Speed Forward, mph (kph) – 24,9 (40,0)
Service Brake – Hydraulic wet disc
Wheels and Tires
Drive Wheels – 4WD 4×4
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 14.9 R24
Rear Tire Size – 18.4 R34
Case CS100 Hydraulics and Hitch
Hydraulic Pump Type – Tandem
Implement Pump Flow (Std), gpm (Lpm) – 13,2 (50,1)
Implement Pump Flow (Opt), gpm (Lpm) – 22,7 (86,0)
Hydraulic Pressure, Bar (psi) – 175 (2550)
Number of Standard Remote Valves – 2
3-Point Hitch Category – 2/3
Draft Sensing or Lift Control – Electronic linkage
Standard Lift Capacity at lift pin, lb (kg) – 10790 (4900)
Standard Lift Capacity 610mm behind pin, lb (kg) – 5500 (2500)
Case CS-100 Dimensions and Weight
Wheelbase, in (mm) – 97,7 (2480)
Length, in (mm) – 166 (4215)
Height, in (mm) – 106 (2700)
Overall Width, in (mm) – 85 (2170)
Turning Radius, in (mm) – 189 (4800)
Steering Angle, deg – 50
Weight (Operating), lb (kg) – 9130 (4150)
Weight (Maximum), lb (kg) – 15850 (7200)