Case CS-52 Engine Specifications
Engine Model – Perkins 903.27
Engine Type – 4 stroke, direct injection diesel
Number of Cylinders – 3 vertical in-line
Displacement, cu in (L) – 165 (2,7)
Engine Bore, in (mm) – 3,74 (95,0)
Engine Stroke, in (mm) – 5,00 (127,0)
Aspiration – Natural
Rated Engine Power, hp (kW) – 52,0 (38,8)
Rated Engine Speed, rpm – 2250
Maximum Torque, Nm (ft-lbs) – 193 (142,8)
Torque Speed, rpm – 1400
Compression – 17.5:1
Fuel System – Direct injection
Fuel Tank Capacity, gal (L) – 19,3 (73,0)
Coolant Capacity, qts (L) – 13,0 (12,5)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 70
Case IH CS52 Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 42,0 (31,9)
PTO Speeds, rpm – 430/540/750/1000
Transmission Configuration
Transmission Type – 16F/8R Synchronized
Number of Forward Speeds – 16
Number of Reverse Speeds – 8
Maximum Speed Forward, mph (kph) – 24,8 (40,0)
Service Brake – Disc
Case CS-52 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size (Std) – 7.50-18
Rear Tire Size (Std) – 14.9R28
Front Tire Size (Opt) – 275/80R20
Rear Tire Size (Opt) – 380/85R28
Case CS-52 Hydraulics and Hitch
Hydraulic System Type – Open Center
Implement Pump Flow, gpm (Lpm) – 9,0 (34,0)
Hydraulic Pressure, Bar (psi) – 175 (2550)
Number of Standard Remote Valves – 1/3
3-Point Hitch Category – 2
Standard Lift Capacity at lift pin, lb (kg) – 5500 (2500)
Case CS52 Dimensions and Weight
Wheelbase, in (mm) – 83,5 (2120)
Length, in (mm) – 140,6 (3570)
Height, in (mm) – 93,7 (2370)
Turning Radius (2WD), in (mm) – 139 (3500)
Turning Radius (4WD), in (mm) – 166 (4200)
Weight, lb (kg) – 5950 (2700)