Case 956XL Engine Specifications
Engine Model – International Harvester D358
Engine Type – 4-stroke, 4-cylinder direct injection diesel
Number of Cylinders – Four
Displacement, cu in (L) – 358 (5,90)
Engine Bore, in (mm) – 3,88 (98,0)
Engine Stroke, in (mm) – 5,06 (129,0)
Aspiration – Natural
Rated Engine Power, hp (kW) – 95,0 (70,8)
Rated Engine Speed, rpm – 2200
Maximum Torque, Nm (ft-lbs) – 355 (261,8)
Torque Speed, rpm – 1400
Fuel System – Direct injection
Fuel Tank Capacity, gal (L) – 37,0 (140,0)
Oil Capacity, qts (L) – 12,7 (12,0)
Coolant Capacity, qts (L) – 22,3 (21,0)
Electrical System Rating, Volts – 12
Charging System – Alternator
Alternator Rating, Amps – 55
Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 77,9 (57,7)
PTO Speeds, rpm – 540/1000
Case IH 956 XL Transmission
Transmission Type (Std) – 16F/8R, IH-Total-synchron
Number of Forward Speeds – 16
Number of Reverse Speeds – 8
Transmission Capacity, qts (L) – 44,5 (42,0)
Maximum Forward Speed, mph (kph) – 17,4 (28,0)
Maximum Reverse Speed, mph (kph) – 6,6 (10,6)
Service Brake – Wet disc
Case 956XL Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size (2WD) – 7.50-20
Rear Tire Size (2WD) – 16.9R38
Front Tire Size (4WD) – 12.4R28
Rear Tire Size (4WD) – 16.9R38
Case IH 956 XL Hydraulics and Hitch
Hydraulic System Type – Open Center
Implement Pump Flow, gpm (Lpm) – 11,4 (43,0)
Hydraulic Pressure, Bar (psi) – 175,0 (2535)
Number of Standard Remote Valves – 3
3-Point Hitch Category – 2
Draft Sensing or Lift Control – Position and draft control
Standard Lift Capacity at lift pin, lb (kg) – 9530 (4320)
Optional Lift Capacity at lift pin, lb (kg) – 11530 (5230)
Case 956XL Dimensions and Weight
Wheel Base (2WD), in (mm) – 103,5 (2620)
Wheel Base (4WD), in (mm) – 102 (2590)
Length (2WD), in (mm) – 165,1 (4190)
Length (4WD), in (mm) – 167,7 (4250)
Overall Width, in (mm) – 90,8 (2300)
Height, in (mm) – 109,1 (2770)
Clearance (2WD), in (mm) – 20,2 (510)
Clearance (4WD), in (mm) – 17,2 (430)
Front Tread (2WD), in (mm) – 60,1-95,2 (1520-2410)
Front Tread (4WD), in (mm) – 64,3-76,1 (1630-1930)
Rear Tread, in (mm) – 67,1-86,8 (1700-2200)
Turning radius, in (mm) – 199 (5050)
Weight (2WD), lb (kg) – 9460 (4290)
Weight (4WD), lb (kg) – 10300 (4670)