Case IH 885 Technical Data

Case 885 Engine Specifications

Engine Model – Case International D268
Engine Type – 4-stroke, direct injection diesel
Number of Cylinders – 4
Displacement, cu in (L) – 268 (4,34)
Engine Bore, in (mm) – 3,94 (100,0)
Engine Stroke, in (mm) – 5,50 (139,7)
Aspiration – Natural
Rated Engine Power, hp (kW) – 79,0 (58,9)
Rated Engine Speed, rpm – 2400
Maximum Torque, Nm (ft-lbs) – 296 (219,1)
Torque Speed, rpm – 1300
Idle Speed, rpm – 650-2650
Compression – 15.1:1
Fuel Tank Capacity, gal (L) – 20,0 (75,7)
Oil Capacity, qts (L) – 9,0 (8,5)
Coolant Capacity, qts (L) – 14,5 (13,7)
Electrical System Rating, Volts – 12
Charging System – Alternator
Alternator Rating, Amps – 65

Case IH 885 Power Take-Off

PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 72,0 (53,7)
PTO Speeds, rpm – 540/1000

Transmission

Transmission Type (Std) – 8F/4R, Synchronized
Number of Forward Speeds – 8
Number of Reverse Speeds – 4
Transmission Type (Opt) – 16F/8R, Partial powershift
Number of Forward Speeds – 16
Number of Reverse Speeds – 8
Transmission Type (Opt) – 8F/4R, Shuttle
Number of Forward Speeds – 8
Number of Reverse Speeds – 4
Maximum Forward Speed, mph (kph) – 22,4 (36,0)
Service Brake – Independent hydraulic wet disc

Case 885 Wheels and Tires

Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size (2WD) – 7.50-18 F2
Rear Tire Size (2WD) – 18.4-30 R1
Front Tire Size (4WD) – 11.2-24 R1
Rear Tire Size (4WD) – 18.4-30 R1

Case IH 885 Hydraulics and Hitch

Hydraulic System Type – Open Center
Implement Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 15,8 (59,8)
Steering Pump Flow, gpm (Lpm) – 2,5 (9,6)
Hydraulic Pressure, Bar (psi) – 173,0 (2500)
Hydraulic Capacity, gal (L) – 9,7 (36,5)
Number of Standard Remote Valves – 1/3
3-Point Hitch Category – 2
Standard Lift Capacity at 24-in (610 mm) ahead pin, lb (kg) – 3260
(1480)

Case 885 Dimensions and Weight

Wheel Base (2WD), in (mm) – 88 (2230)
Wheel Base (4WD), in (mm) – 85,2 (2160)
Length (2WD), in (mm) – 142 (3600)
Length (4WD), in (mm) – 148 (3750)
Overall Width (2WD), in (mm) – 73,2 (1850)
Overall Width (4WD), in (mm) – 78 (1980)
Height, in (mm) – 97,4 (2470)
Clearance, in (mm) – 18,2 (460)
Turning radius (2WD), in (mm) – 154 (3900)
Turning radius (4WD), in (mm) – 174 (4400)
Weight (Operating, 2WD), lb (kg) – 7370 (3340)
Weight (Operating, 4WD), lb (kg) – 7850 (3560)

Leave a Comment