Case 495 Engine Specs
Engine Model – Case D-179
Engine Type – 4-stroke, 3-cylinder diesel
Number of Cylinders – Three
Displacement, cu in (L) – 179 (2,9)
Engine Bore, in (mm) – 3,88 (99,0)
Engine Stroke, in (mm) – 5,06 (129,0)
Aspiration – Natural
Rated Engine Power, hp (kW) – 53,0 (39,5)
Rated Engine Speed, rpm – 2200
Maximum Torque, Nm (ft-lbs) – 182 (134,2)
Torque Speed, rpm – 1400
Idle Speed, rpm – 700-2400
Compression – 15:1
Fuel Tank Capacity, gal (L) – 20,0 (75,7)
Oil Capacity, qts (L) – 8,2 (7,8)
Coolant Capacity, qts (L) – 12,0 (11,4)
Electrical System Rating, Volts – 12
Charging System – Alternator
Alternator Rating, Amps – 45
Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 42,0 (31,3)
PTO Speeds, rpm – 540
PTO / Engine Speeds, rpm – 540/1936
Case IH 495 Transmission
Transmission Type (Std) – 8F/4R, Partially synchronized
Number of Forward Speeds – 8
Number of Reverse Speeds – 4
Clutch – Dry disc
Transmission Type (Opt) – 16F/8R, Partial power shift
Number of Forward Speeds – 16
Number of Reverse Speeds – 8
Maximum Forward Speed, mph (kph) – 15,6 (25,1)
Maximum Reverse Speed, mph (kph) – 4,9 (7,8)
Service Brake – Hydraulic wet disc
Case 495 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 6.00-16
Rear Tire Size – 14.9-24
Case IH 495 Hydraulics and Hitch
Hydraulic System Type – Open Center
Implement Pump Flow, gpm (Lpm) – 15,6 (59,2)
Hydraulic Capacity, gal (L) – 9,0 (34,1)
Number of Standard Remote Valves – 1
3-Point Hitch Category – 2/1
Standard Lift Capacity at lift pin, lb (kg) – 2340 (1060)
Case 495 Dimensions and Weight
Wheelbase, in (mm) – 79,8 (2025)
Length, in (mm) – 136 (3450)
Height, in (mm) – 93,5 (2370)
Overall Width, in (mm) – 66 (1670)
Ground Clearance (2WD), in (mm) – 22,1 (560)
Ground Clearance (4WD), in (mm) – 14 (350)
Weight (2WD), lb (kg) – 5200 (2350)
Weight (4WD), lb (kg) – 6090 (2760)