Case 485XL Engine Specifications
Engine Model – International D-179
Engine Type – 4-stroke, 3-cylinder diesel
Number of Cylinders – Three
Displacement, cu in (L) – 179 (2,9)
Engine Bore, in (mm) – 3,88 (99,0)
Engine Stroke, in (mm) – 5,06 (129,0)
Aspiration – Natural
Rated Engine Power, hp (kW) – 52,0 (38,8)
Rated Engine Speed, rpm – 2180
Maximum Torque, Nm (ft-lbs) – 182 (134,2)
Torque Speed, rpm – 1400
Compression – 15:1
Fuel Tank Capacity, gal (L) – 29,6 (112,0)
Coolant Capacity, qts (L) – 12,0 (11,4)
Electrical System Rating, Volts – 12
Charging System – Alternator
Alternator Rating, Amps – 45
Case 485 XL Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 41,0 (30,6)
PTO Speeds, rpm – 540
PTO / Engine Speeds, rpm – 540/1936
PTO Clutch – Hydraulic wet disc
Transmission Configuration
Transmission Type (Std) – 8F/4R, Synchromesh
Number of Forward Speeds – 8
Number of Reverse Speeds – 4
Clutch – Dry disc
Clutch Disc Diameter, in (mm) – 11 (280)
Transmission Type (Opt) – 16F/8R, 2-Speed power shift
Number of Forward Speeds – 16
Number of Reverse Speeds – 8
Maximum Forward Speed, mph (kph) – 16,5 (26,5)
Maximum Reverse Speed, mph (kph) – 7,6 (12,2)
Service Brake – Wet disc
Case IH 485XL Wheels and Tires
Drive Wheels – 2WD 4×2
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 7.50-16
Rear Tire Size – 12.4-36
Case 485 XL Hydraulics and Hitch
Hydraulic System Type – Open Center
Implement Pump Flow, gpm (Lpm) – 12,4 (46,8)
Steering Pump Flow, gpm (Lpm) – 2,6 (9,8)
Hydraulic Pressure, Bar (psi) – 173 (2500)
Steering Pressure, Bar (psi) – 107 (1550)
3-Point Hitch Category – 2/1
Draft Sensing or Lift Control – Top link draft sensing
Standard Lift Capacity at lift pin, lb (kg) – 3700 (1680)
Case 485XL Dimensions and Weight
Wheelbase, in (mm) – 84,3 (2130)
Length, in (mm) – 142,5 (3610)
Height, in (mm) – 99,2 (2510)
Overall Width, in (mm) – 73 (1850)
Turning Radius, in (mm) – 138 (3510)
Weight, lb (kg) – 5620 (2550)