Case IH 4230 Engine Specs
Engine Model – Case D269
Engine Type – 4 stroke, diesel
Engine Gross Power Rated, hp (kw) – 83,95 (62,60)
Engine Net Power Rated, hp (kw) – 78,9 (58,9)
Rated Engine Speed, rpm – 2400
Fuel Tank, gal (litres) – 35,6 (135,0)
Cylinders – Four
Displacement, cu in (litres) – 268,0 (4,4)
Engine Bore, in (mm) – 3,94 (100,0)
Engine Stroke, in (mm) – 5,5 (139,7)
Maximum Torque (DIN) – 289,0 Nm (213,9 lb-ft)
Max. Torque Speed, rpm – 1300
Air Cleaner Type – Dry
Aspiration – Natural
Fuel System Control – Mechanical
Oil Capacity, qts (litres) – 10,5 (9,9)
Coolant Capacity, qts (litres) – 14,6 (13,8)
Electrical Rating, Volts – 12
Charging System – Alternator
Alternator Rating, Amps – 45/65
Batteries Cold-cranking, Amps – 650/810
Case 4230 Transmission
Standard Transmission – 8 Forward x 4 Reverse
Transmission Type – Synchronized
Forward / Reverse Speeds – 8F / 4R
Clutch – 12-in. Dry Cerametallic
Maximum Speed Forward, mph (kph) – 21,75 (35,00)
Oil capacity (2WD/4WD), qts (litres) – 35,9 (34,0) / 38,6 (36,5)
Optional Transmission – 16 Forward x 8 Reverse
Transmission Type – Powershift
Forward / Reverse Speeds – 16F / 8R
Creeper Range – Yes
Case IH 4230 Power Take Off
PTO Horsepower, hp (kw) – 72,0 (53,7)
Power Take Off Speeds, rpm – 540/1000
Rear PTO Type – Independent
Clutch – Hydraulic wet disc
Case 4230 Hydraulic System and Hitch
Hydraulic System Type – Open Center
Hydraulic Pressure – 172,7 Bar (17,8 Mpa)
Total Flow, gpm (Lpm) – 16,1 (60,9)
Standard Remote Valves – 0 to 3
Hydraulic System Capacity (ROPS/Cab), gal (litres) – 9,0 (34,1) / 9,7
(36,8)
3-Point Hitch – Category 2
Draft Sensing or Lift Control – Draft and position control
Rear Lift Capacity, lb (kg) – 3665 (1662)
Mechanical
Drive Wheels – 2WD/4WD
Steering Wheels – Front Steer
Steering – Hydrostatic Power
Differential Lock – Mechanical / Electro-hydraulic
Brake Type – Hydraulic Wet Disc
Case 4230 Wheels and Tires
Front Tire Size (2WD) – 7.50-16
Front Tire Size (4WD) – 12.4-24
Rear Tire Size (2WD) – 16.9-28
Rear Tire Size (4WD) – 16.9-28
Front tread (2WD straight), in (mm) – 52 to 77 (1320 to 1950)
Front tread (2WD sweptback), in (mm) – 48 to 80 (1210 to 2030)
Front tread (2WD low), in (mm) – 52 to 80 (1320 to 2030)
Case IH 4230 Dimensions and Weight
Wheelbase (2WD), in (mm) – 88,7 (2255)
Wheelbase (4WD), in (mm) – 88,2 (2240)
Length, in (mm) – 148,0 (3750)
Height, in (mm) – 104,0 (2650)
Turning radius, in (mm) – 157,0 (4000)
Weight (2WD, ROPS), lb (kg) – 6687 (3035)
Weight (4WD, ROPS), lb (kg) – 7395 (3355)
Maximum Weight (ROPS), lb (kg) – 10150 (4605)
Maximum Weight (Cab), lb (kg) – 12125 (5500)