Case IH 4220 Engine Specs
Engine Model – Case D246
Engine Type – 4 stroke, four-cylinder diesel
Number of Cylinders – 4
Displacement, cu in (L) – 206 (3,38)
Engine Bore, in (mm) – 3,94 (100,0)
Engine Stroke, in (mm) – 5,06 (128,5)
Aspiration – Natural
Rated Engine Power, hp (kW) – 77,0 (57,4)
Rated Engine Speed, rpm – 2300
Maximum Torque, Nm (ft-lbs) – 256 (189,4)
Torque Speed, rpm – 1600
Fuel Tank Capacity, gal (L) – 35,7 (135,0)
Oil Capacity, qts (L) – 10,4 (9,8)
Coolant Capacity, qts (L) – 14,5 (13,7)
Electrical System Rating, Volts – 12
Case 4220 Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 59,2 (44,2)
Clutch – Hydraulic wet disc
PTO Speeds, rpm – 540/1000
Transmission Configuration
Transmission Type (Std) – 8F/4R Synchromesh
Number of Forward Speeds – 8
Number of Reverse Speeds – 4
Clutch – Dry cerametallic disc
Clutch Disc Diameter, in (mm) – 11 (280)
Maximum Speed (Forward), mph (kph) – 15,7 (25,2)
Maximum Speed (Reverse), mph (kph) – 4,8 (7,9)
Transmission Type (Std) – 16F/8R Synchromesh Creeper
Number of Forward Speeds – 16
Number of Reverse Speeds – 8
Clutch – Dry cerametallic disc
Clutch Disc Diameter, in (mm) – 12 (300)
Maximum Forward Speed (Creeper), mph (kph) – 2,1 (3,4)
Maximum Reverse Speed (Creeper), mph (kph) – 0,7 (1,1)
Service Brake – Hydraulic wet disc
Case IH 4220 Wheels and Tires
Drive Wheels – 4WD 4×4
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 12.4 R24
Rear Tire Size – 16.9 R34
Case 4220 Hydraulics and Hitch
Hydraulic System Type – Open center
Implement Pump Flow, gpm (Lpm) – 17,2 (65,0)
Hydraulic Pressure, Bar (psi) – 175 (2550)
3-Point Hitch Category – 2/3
Draft Sensing or Lift Control – Draft and position control
Standard Lift Capacity at lift pin, lb (kg) – 7700 (3500)
Case IH 4220 Dimensions and Weight
Wheelbase, in (mm) – 88,2 (2240)
Length, in (mm) – 148 (3750)
Height, in (mm) – 104 (2650)
Turning Radius, in (mm) – 157 (4000)
Weight, lb (kg) – 7480 (3400)