Case IH 1056 Engine Specs
Engine Model – International Harvester D358
Engine Type – 4 stroke, diesel
Engine Power Rated, hp (kw) – 105,0 (78,3)
Rated Engine Speed, rpm – 2300
Power Boost, hp (kw) – No boost
Fuel Tank, gal (litres) – 37,0 (140,0)
Cylinders – 6
Displacement, cu in (litres) – 358,0 (5,9)
Engine Bore, in (mm) – 3,87 (98,4)
Engine Stroke, in (mm) – 5,06 (128,5)
Cooling – Water cooled radiator
Aspiration – Natural
Fuel System – Direct injection
Fuel System Control – Mechanical
Maximum Torque (DIN) – 378,0 Nm (279,7 lb-ft)
Torque Speed, rpm – 1400
Electrical Rating, Volts – 12
Starter – Electric
Batteries Number – 1
Engine Oil Capacity, litres – 12
Case IH 1056 XL Transmission
Standard Transmission – 16 Forward x 8 Reverse
Transmission Type – Synchronized
Forward / Reverse Speeds – 16F / 8R
Reversing Gear – Mechanical
Maximum Speed Forward, mph (kph) – 24,3 (39,0)
Case 1056 XL Power Take Off
PTO Horsepower, hp (kW) – 85,0 (63,5)
Power Take Off Speeds, rpm – 540/1000
PTO Type – Mechanical
Case 1056 Hydraulic System and Hitch
Hydraulic System Type – Open Center
Hydraulic Pressure – 167.0 Bar (16.7 Mpa)
Standard Pump Flow, gpm (Lpm) – 11,9 (45,0)
Standard Remote Valves – 3
3-Point Hitch – Category 2
Draft Sensing or Lift Control – Position and draft control
Standard Lift Capacity 24 in behind pin, lb (kg) – 9532 (4323)
Standard Lift Capacity at lift pin, lb (kg) – 11530 (5230)
Mechanical
Drive Wheels – 2WD/4WD
Steering Wheels – Front Steer
Steering – Hydrostatic Power
Brake Type – Wet Disc
Case IH 1056 XL Treads and Tires
Front Tires (2WD) – 7.50-20
Rear Tires (2WD) – 18.9R38
Front Tires (4WD) – 13.6R28
Rear Tires (4WD) – 18.4R38
Front Tread (2WD), in (mm) – 60,1 to 75,2 (1520 to 1910)
Front Tread (4WD), in (mm) – 64,3 to 76,0 (1630 to 1930)
Rear Tread, in (mm) – 67,1 to 86,8 (1700 to 2200)
Case IH 1056 XL Dimensions and Weight
Wheel Base (2WD), in (mm) – 103,4 (2620)
Wheel Base (4WD), in (mm) – 102,0 (2590)
Length (2WD), in (mm) – 165,2 (4190)
Length (4WD), in (mm) – 167,8 (4255)
Height, in (mm) – 110,0 (2790)
Overall Width, in (mm) – 90,8 (230)
Clearance (2WD), in (mm) – 21,2 (530)
Clearance (4WD), in (mm) – 18,1 (450)
Turning radius, in (mm) – 199,1 (5050)
Weight (2WD), lb (kg) – 9634 (4369)
Weight (4WD), lb (kg) – 10470 (4749)