NH T8020 Engine Specifications
Engine Model – New Holland CNH
Engine Type – 4 valves turbocharged diesel
Number of Cylinders – 6
Displacement, cu in (L) – 506,5 (8,3)
Engine Bore, in (mm) – 4,49 (114,0)
Engine Stroke, in (mm) – 5,32 (135,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 248,0 (182,0)
Maximum Engine Power, hp (kW) – 281,0 (207,0)
Rated Engine Speed, rpm – 2200
Maximum Torque, Nm (ft-lbs) – 1162 (857)
Torque Speed, rpm – 1500
Torque Rise, % – 47
Emission Level – Tier 3
Fuel System – Common Rail electronic injection
Fuel Tank Capacity, gal (L) – 180,0 (682,0)
Electrical System Rating, Volts – 12
Charging System – Alternator
Alternator Rating, Amps – 120
New Holland T8020 Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 200,0 (149,1)
PTO Speeds, rpm – 540/1000
PTO / Engine Speeds, rpm – 540/1988, 1000/1984
PTO Activation – Electro-hydraulic
Transmission Configuration
Transmission (Std) – 19F/4R Ultra Command
Transmission Type – Full powershift with integrated electronic shuttle
Number of Forward Speeds – 19
Number of Reverse Speeds – 4
Clutch – Electro-hydraulic wet disc
Maximum Speed (Forward), mph (kph) – 31,3 (50,0)
Transmission (Opt) – 23F/6R Ultra Command
Transmission Type – Full powershift
Number of Forward Speeds – 23
Number of Reverse Speeds – 6
Maximum Speed (Forward), mph (kph) – 25,1 (40,0)
New Holland T8020 Wheels and Tires
Drive Wheels – 4WD 4×4
Steering Configuration – Front Steer
Steering System – Power Steering
Front Tire Size – 600/65 R28
Rear Tire Size – 710/70 R42
Axles and Brakes
Standard Front Axle – FWD
Optional Front Axle – Terraglide
Optional Front Axle – SuperSteer
Service Brake – Hydraulic wet disc
NH T8020 Hydraulic System
Hydraulic System Type – Closed centre load sensing
Implement Pump Type – Variable displacement pump
Implement Pump Flow, gpm (Lpm) – 43,7 (166,0)
Hydraulic Pressure, Bar (psi) – 224 (3250)
Number of Standard Remote Valves – 5
3-Point Hitch
3-Point Hitch Category – 3/3N
Draft Sensing or Lift Control – Electronic draft control
Standard Lift Capacity 24-in (610mm) behind pin, lb (kg) – 14755 (6706)
Standard Lift Capacity at lift pin, lb (kg) – 20080 (9126)
Front Hitch Max. Lift Capacity (4WD), lb (kg) – 14015 (6370)
Front Hitch Max. Lift Capacity (SuperSteer), lb (kg) – 14210 (6460)
New Holland T8020 Dimensions and Weight
Wheelbase (4WD), in (mm) – 121,2 (3070)
Wheelbase (SuperSteer), in (mm) – 129,3 (3280)
Length, in (mm) – 229,5 (5820)
Height, in (mm) – 131,1 (3320)
Overall Width, in (mm) – 98 (2490)
Ground Clearance, in (mm) – 14,7 (372)
Front Tread, in (mm) – 61,3-89,7 (1550-2270)
Rear Tread, in (mm) – 60,1-92,5 (1520-2340)
Turning Radius (4WD), in (mm) – 198 (5000)
Turning Radius (SuperSteer), in (mm) – 182 (4600)
Weight (4WD), lb (kg) – 19755 (8960)
Weight (Terraglide), lb (kg) – 20550 (9320)
Weight (SuperSteer), lb (kg) – 20145 (9140)