Kubota D1803 Engine Specifications
Advertised Engine Power, Rated, hp (kW) – 37 (27.6)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2700
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 11.2 (42.4)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Engine Model – Kubota D1803 CRE4GL1
Number of Cylinders – 3
Displacement, cu in (L) – 111.4 (1.826)
Engine Bore, in (mm) – 3.43 (87)
Engine Stroke, in (mm) – 4.03 (102.4)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Naturally aspirated
Fuel System Description – Common Rail System
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – EGR std
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Horizontal
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 40 ROPS; 60 Cab
Kubota L3560 Power Take-off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 29.5 / 28 (22 /
20.9)
PTO Speeds, rpm – 540
PTO operational Type (Independent; Live; Continuous) – Independent
Basic Transmission
Manufacturer’s Description – FST
Transmission Type – Fully synchronized and Shuttle
Number of Forward / Reverse Speeds – 8F / 8R
Maximum Speed Forward, mph (kph) – 17.2 (27.7)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Yes
Optional Transmission 1
Manufacturer’s Description – Glide Shift (GST)
Transmission Type – Clutchless hydraulic shift
Number of Forward / Reverse Speeds – 12F / 8R
Optional Transmission 2
Manufacturer’s Description – HST Plus
Transmission Type – Hydrostatic
Number of Forward / Reverse Speeds – Infinite, 3 ranges
Wheels
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Kubota L3560 Rear Axle Assembly
Final Drive Location and Description – Inboard pinion and gear
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Front Axle and Brakes
Suspended Front Axle Available – No
Service Brake Type – Wet disc
Hydraulic System
Hydraulic System Type – np
Main Hydraulic Pump Type – np
Implement Pump Flow, gpm (Lpm) – 8.3 (31.5)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – Up to 3 optional
Kubota L3560 3-Point Hitch
3-Point Hitch Category – Category 1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Draft sensing optional
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 2,650 (1200)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Standard Lift Capacity at lift pin, lb (kg) – np
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar Description – Extendable, non-swing
Wheelbase
Wheelbase, 2WD, in (mm) – No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 71.1 (1805)
Dimensions
Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 115 (2920)
Height to Top of Cab, in (mm) – 90.6 (2300)
Height to Top of ROPS raised, in (mm) – 97.2 (2470)
Overall Width, with standard wheels or tracks, in (mm) – 59.8 (1520)
Weight (w/Tires or Tracks)
Weight, 2WD w/ROPS, lb (kg) – No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) – 3,395 (1540)
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 3,847 (1745)
Weight, Total allowable, w/maximum ballast, lb (kg) – np
Tires
Front Tire Size, 2WD – No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track – 7.2-16 R1
Rear Tire Size or Track Width – 12.4-24 R1