John Deere X950R Specs

John Deere X950R Engine Specifications

Engine Model – 3TNV76-XCJLT
Engine Type – Vertical, in-line, 4-cycle water-cooled diesel engine
Combustion chamber – Indirect injection
Number of cylinders – 3
Cylinder bore x stroke, mm x mm – 76×82
Displacement, L – 1.115
Continuous rating Revolving speed – 3600
Continuous rating Output (NET), kW – 17.7 (24.1)
Rated output Revolving speed – 3600
Rated output Output (NET), kW (PS) – 19.5 (26.5)
Max. no-load speed (±25), min1 – 3800
Ignition order – 1-3-2-1 (No.1 cylinder on flywheel side)
Power take off – Flywheel
Direction of rotation – Counterclockwise (viewed from flywheel)
Cooling system – Radiator
Lubrication system – Forced lubrication with trochoid pump
Starting system – Electric
Applicable fuel – Diesel oil, BS 2869 A1 or A2 (cetane No.45 min.)
Applicable lubricant – API grade class CD or CF
Lubricant capacity (oil pan) Total, L – 4.4
Lubricant capacity Effective, L – 2.1
Cooling water capacity (engine only), L – 0.9
Overall length, mm – 485
Overall width, mm – 436
Overall height, mm – 559
Engine mass (dry) (with flywheel housing), kg – 112
Cooling fan (std.), mm – 335 mm O/D, 5 blades pusher type F
Crankshaft V pulley diameter / Fun V pulley diameter (std.), mm –
0110/0100

JD X950R Transmission

Transmission Type – Hydrostatic
Drive System – Twin Touch Foot Pedals, 2-Wheel Drive
Number of Speeds – Infinite
Maximum Forward Speed km/h (mph) – 13.7 (8.5)
Maximum Reverse Speed km/h (mph) – 9.7 (6)
Cruise Control – Standard
Differential Lock – Standard, Hydraulic Traction Assist
Brakes – Internal Wet Disc

Electrical System

Starter – 1.2kW (12-Volt)
Charging System – Alternator, 40 amp
Battery – 500 CCA (cold cranking amps)
12-Volt Outlet – Maximum 15 amp

John Deere X950R Hydraulic and Steering

Hydraulic Flow – 20.9 L/min
Steering – Hydrostatic power
Steering Type – Front Wheel Steer
Turning Radius, LH/RH – 183 / 155 cm (in.)
Selective Control Valves (SCVs) – Single Lever 2 Function SCV

JD X950R Tyre Pressures

Front Tyre – 18×8.50-8. Turf, 4PR
Rear Tyre – 26×12-12, Turf, 2PR
Front Tyre Pressures – 138-165 kPa (20-24 psi)
Front Tyre Pressures – 90-117 kPa (13-17 psi)

Capacities

Fuel Tank – 19.7 L (5.2 gal)
Transmission/Hydraulic – 11.3 L (12.0 qt)
Cooling System – 2.8 L (3.0 qt)
Engine Oil (with filter) – 3.2 L (3.4 qt)

John Deere X950R Attachments

48 Inch Mower Deck

Mower Deck Type – Stamped Steel, Rolled Edges
PTO Engagement – Electric Drive Clutch
Deck Lift / Lower – Hydraulic
Cutting Height – 25-133 mm (1-5.25 in.) increments 6 mm / 0.25 in
Cutting Width – 1220 mm (48 in.)
Number of Blades – 2
Pre-Set Height of Cut – Std
Rotation Speed of Cutting Device w/ 48-Mower – 2382 r/min at 3400 r/min
engine speed
Sound Measurements w/ 48-Mower – 92.8±1 db(A) at 3450 r/min engine speed
Vibration with 48-Mower – 1.2 m/s2

54 Inch Mower Deck

Mower Deck Type – Stamped Steel, Rolled Edges
PTO Engagement – Electric Drive Clutch
Deck Lift / Lower – Hydraulic
Cutting Height – 25-133 mm (1-5.25 in.) increments 6 mm / 0.25 in
Cutting Width, cm (in.) – 1370 mm (54 in.)
Number of Blades – 2
Pre-Set Height of Cut – Standard
Rotation Speed of Cutting Device w/ 54-Mower – 2130 r/min at 3400 r/min
engine speed
Sound Measurements w/ 54-Mower – 92.0±1 db(A) at 3450 r/min engine speed
Vibration with 54-Mower – 1.1 m/s2

John Deere X950R Dimensions

Overall Height ROPS Up – 2.10 m (82.7 in.)
Overall Height ROPS Folded – 1.70 m (66.9 in.)
Overall Height with Optional Cab (No Beacon) – 1.97 m (77.6 in.)
Overall Width – 1.25 m (49 in.)
Overall Length (Minimum Length Configuration) – 2.26 m (89 in.)
Overall Length (Maximum Length Configuration) – 3.70 m (146 in.)
Wheel Base – 1.46 m (57.5 in.)
Ground Clearance – 1.45 m (57 in.)
Weight, Tractor with ROPS – 606 kg (1336 lb.)
Weight, Low Dump with 48-Mower – 784 kg (1728 lb.)
Weight, Low Dump with 48-Mower and ROPS – 822 kg (1812 lb.)
Weight, High Dump with 54-Mower and 4 front weights – 1002 kg (2209 lb.)
Weight, High Dump with 54-Mower, 4 front weights, and ROPS – 1040 kg
(2293 lb.)

Leave a Comment